S13 Door Card Insert

Broadfield's Blog

I get a lot of 240sx owners asking me about the best way to reupholster the S13 door card insert. It’s easily the most common interior mod, basically only interior mod, that S13 owners attempt. The OEM door card consists of a vinyl wrapped card with some nasty light beige/gray tweed material in the non-removable insert. If you have never seen it, it’s bad! This tweed insert usually just gets ripped off by most owners and the standard vinyl behind it is good enough for some. However, a lot of owners like to attempt to reupholster the insert. Unfortunately there are several issues when attempting this. 1) The area is concave… so the material is under a high stress and wants to “lift” in the concave area over time, or even in a very short time in the heat. 2) Off the shelf spray adhesive that most people use isn’t…

View original post 1,129 more words


Leave a Reply, you fine Fellow!

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s